How to Install Solar Panels Seamlessly

Several homeowners are now considering having solar panels installed on their roofs. This is because harnessing solar energy to generate electricity proves to have several advantages which significantly outweighs a few drawbacks. 

If having a solar power system installed on your roof piques your interest, then you have two options. One is to try and do the installation yourself and the other, which is perhaps the better option, is to have certified solar power electricians do the installation for you. The solar installers Sydney locals go for are the ones that hold the proper licenses and certificates to work with solar power systems. This is because their licenses provide homeowners with the guarantee that they are properly equipped with the skills and knowledge necessary to install solar panels.

Regardless of whichever option you decide later on, it is a good idea to look into the steps that go into the solar panel installation.

Proper Planning

One of the first things that should be done even before a solar panel installation is proper planning. In this step, you or the electrician needs to determine how and where the solar panels should be installed. This includes measuring the dimensions of the panels, ensuring that they fit in the space allotted in the roof. 

In proper planning, you should also determine the amount of weight that your roof can carry, as well as the necessary repairs that you need to do with your roof to ensure that it is sturdy and ready for the installation of the panels. You also need to take note of where the sun rises and sets to ensure that you will be able to position the panels optimally, getting the most sunlight possible.

Installation of Physical Supports

The first thing that you need to attach to your roof is not the panels directly, but the physical supports or the mounts that will hold them. Two of the most common supports installed include brackets, which are ideal for sloped roofs, as well as mount rails, which are used for flat roofs. Make sure that these supports are securely attached to the rafter or trusses of your house for a firmer and safer hold.

Attaching the Panels

As soon as you get the mounts attached to your roof, the next step is the installation of solar panels to the supports. Handle the panels with precaution as you lay them on the brackets or rail system and fasten them tightly. Add any extra support as necessary to help your panels withstand extreme weather conditions.

Connecting the Panels

After fastening your panels on your roof, the next step is for you to connect the panels together. In doing so, you need to ensure that the wires are properly insulated. You also need to connect the ground wire to the earth to mitigate any electrical shock.

Setting up the PV Components

As soon as you come down from the roof, the next part is to set up the PV components of your solar power system. This includes installing your inverter in a safe and shaded part of your home. Its location should also be well-ventilated and dry, and as much as possible, kept at room temperature at all times. From there, you need to connect your inverter to your AC breaker panel.

The Bottomline

The entire solar panel installation process is not that complex. In fact, there are only a few steps that you need to take. However, you need to consider several factors before having solar panels installed. In doing so, you will be able to maximise the benefits that a solar power system will be able to give you.

Written by 

Leave a Reply

Your email address will not be published.